In UnixArena,we have talked more about LDOM aka Oracle VM for SPARC.But this article will provide the solution to identify the installed physical memory of the server from control domain. There is no direct command available to find out the total physical memory and un-allocated memory from control domain.Once you have set the resources limit to control domain, all the hardware related commands and monitoring tools will display what we have allocated to it. You can use prtidag or top command to verify it.
For an example, If you have SPARC T4-4 server, which normally comes with 256yGB physical Memory. Once you have set 16GB memory to control domain, prtdiag will display only 16GB. How can you identify the un-allocated physical memory ? If you are new to the environment, how can you identify the total physical memory ?
Option:1
- Login to ILOM and to find the physical memory of the server. (#value1)
- Use the “ldm list” to know the currently allocated memory for primary domain and guest domains.(#value2)
- Subtract the physical memory from allocated memory. (Un-allocated memory= value1-value2)
Option:2
- Use “ldm list-devices -a” command to know the total physical memory. (You need to add the all pieces of memory addresses from this command) (#value1)
- Use the “ldm list” to know the currently allocated memory for primary domain and guest domains.(#value2)
- Subtract the physical memory from allocated memory. (Un-allocated memory= value1-value2)
If you go with Option#2, You need to calculate the values like below to find the (value#1 ), total physical memory.
root@UACD1:~# ldm list-devices -a memory
MEMORY
PA SIZE BOUND
0xa00000 32M _sys_
0x2a00000 96M _sys_
0x8a00000 374M _sys_
0x20000000 256M primary
0x30000000 7424M Guest1
0x200000000 8G Guest2
0x400000000 512M Guest3
0x420000000 3328M Guest1
0x4f0000000 4352M Guest4
0x600000000 8G Guest5
0x800000000 2560M Guest1
0x8a0000000 5632M Guest5
0xa00000000 5376M Guest2
0xb50000000 256M Guest1
0xb60000000 2560M Guest4
0xc00000000 3840M Guest4
0xcf0000000 1280M
0xd40000000 3G Guest5
0xe00000000 1792M Guest6
0xe70000000 2G Guest5
0xef0000000 4352M
0x1000000000 2G Guest5
0x1080000000 2816M Guest5
0x1130000000 3328M Guest5
0x1200000000 256M Guest1
0x1210000000 7936M Guest6
0x1400000000 8G Guest1
0x1600000000 256M primary
0x1610000000 256M primary
0x1620000000 256M primary
0x1630000000 256M primary
0x1640000000 256M primary
0x1650000000 256M primary
0x1660000000 6656M
0x1800000000 4G Guest5
0x1900000000 2G primary
0x1980000000 1280M Guest5
0x19d0000000 768M primary
0x1a00000000 2G Guest3
0x1a80000000 6G Guest5
0x1c00000000 6G Guest1
0x1d80000000 2G
0x1e00000000 2560M Guest6
0x1ea0000000 5632M Guest7
0x2000000000 8G Guest5
0x2200000000 2G Guest2
0x2280000000 4G Guest4
0x2380000000 512M Guest6
0x23a0000000 256M primary
0x23b0000000 1280M Guest6
0x2400000000 2816M Guest3
0x24b0000000 256M Guest5
0x24c0000000 512M Guest3
0x24e0000000 2304M Guest5
0x2570000000 2G Guest3
0x25f0000000 256M Guest5
0x2600000000 6912M Guest6
0x27b0000000 1280M
0x2800000000 6G Guest6
0x2980000000 256M Guest5
0x2990000000 1792M Guest6
0x2a00000000 2560M Guest6
0x2aa0000000 256M Guest2
0x2ab0000000 1280M Guest4
0x2b00000000 512M Guest2
0x2b20000000 1536M Guest1
0x2b80000000 256M Guest4
0x2b90000000 512M Guest3
0x2bb0000000 1280M Guest6
0x2c00000000 512M Guest3
0x2c20000000 7680M Guest7
0x2e00000000 8G
0x3000000000 7936M Guest5
0x31f0000000 256M Guest8
0x3200000000 5632M Guest3
0x3360000000 2560M Guest1
0x3400000000 8G Guest8
0x3600000000 2G Guest7
0x3680000000 2G
0x3700000000 512M Guest7
0x3720000000 3584M
0x3800000000 7936M Guest8
0x39f0000000 256M primary
0x3a00000000 7424M Guest5
0x3bd0000000 512M Guest1
0x3bf0000000 256M primary
0x3c00000000 1792M Guest3
0x3c70000000 256M Guest7
0x3c80000000 256M Guest5
0x3c90000000 1792M
0x3d00000000 2G primary
0x3d80000000 256M Guest7
0x3d90000000 1G
0x3dd0000000 8960M primary
root@UACD1:~#
To eliminate the above complexity, i have developed one small script .
This script can provide you the below information.
- Total Physical memory
- Allocated Physical Memory
- Un-allocated Physical Memory
- Primary and Guest Domains memory segments
Here is the sample output of the script.
root@UACD:~# ./ldm.mem.sh
----------------------------------
Total Physical Memory = 1024.0000 GB
----------------------------------
---------------------------------------
Total Allocated Physical Memory = 584 GB
---------------------------------------
------------------------------------------
Total Unallocated Physical Memory = 440.0000 GB
------------------------------------------
---------------Memory Allocations for Guest & Primary Domain-----------------
primary
RA PA SIZE
0x30000000 0x30000000 8G
------------------------------------------------------------------------------
GUEST1
RA PA SIZE
0x30000000 0x230000000 64G
------------------------------------------------------------------------------
GUEST2
RA PA SIZE
0x80000000 0x300000000000 256G
------------------------------------------------------------------------------
GUEST3
RA PA SIZE
0x80000000 0x80000000000 256G
------------------------------------------------------------------------------
What else you need ? Just grab the script and use it .
[box type=”note” ]You have to run the script from control domain as root user.[/box]
Copy the below script to your control domain and run it like above after setting the execute permission.
#!/usr/bin/bash
# Solaris LDOM (Oracle VM for SPARC)- Total Memory calculation script
ARCHI=$(echo `uname -m`)
if [ "$ARCHI" = "sun4v" ];then
MBSEG=$(echo `/usr/sbin/ldm list-devices -a memory |awk ' { print $2 } ' |sort -nr |grep -v SIZE |grep M |tr -d M |awk '{sum+=$1}END{print sum}' |sed '/^$/d' ` )
GBSEG=$(echo `/usr/sbin/ldm list-devices -a memory |awk ' { print $2 } ' |sort -nr |grep -v SIZE |grep G |tr -d G |awk '{sum+=$1}END{print sum}' |sed '/^$/d' ` )
if [ -z "$MBSEG" ];
then
TOTALPHYMEM="$GBSEG"
else
if [ -z "$GBSEG" ];
then
TMBSEG=$(echo "scale=4;$MBSEG/1024" |bc )
TOTALPHYMEM="$TMBSEG"
else
TMBSEG=$(echo "scale=4;$MBSEG/1024" |bc )
TOTALPHYMEM=$(echo "$TMBSEG" "+" "$GBSEG" |bc)
fi
fi
echo "----------------------------------"
echo "Total Physical Memory = $TOTALPHYMEM GB"
echo "----------------------------------"
GBSEGUSED=$(echo `/usr/sbin/ldm list |awk ' { print $6 } ' |grep -v MEMORY |grep G|tr -d G |awk '{sum+=$1}END{print sum}' |sed '/^$/d' ` )
MBSEGUSED1=$(echo `/usr/sbin/ldm list |awk ' { print $6 } ' |grep -v MEMORY |grep M|tr -d M |awk '{sum+=$1}END{print sum}'|sed '/^$/d' ` )
if [ -z "$MBSEGUSED1" ]; then
TOTALPHYMEMUSED="$GBSEGUSED"
else
if [ -z "$GBSEGUSED" ]; then
MBSEGUSED=$(echo "scale=4;$MBSEGUSED1/1024" |bc )
TOTALPHYMEMUSED="$MBSEGUSED"
else
MBSEGUSED=$(echo "scale=4;$MBSEGUSED1/1024" |bc )
TOTALPHYMEMUSED=$(echo "$MBSEGUSED" "+" "$GBSEGUSED" |bc)
fi
fi
echo
echo "---------------------------------------"
echo "Total Allocated Physical Memory = $TOTALPHYMEMUSED GB"
echo "---------------------------------------"
echo
echo "------------------------------------------"
echo "Total Unallocated Physical Memory = $(echo "$TOTALPHYMEM" "-" "$TOTALPHYMEMUSED" |bc ) GB"
echo "------------------------------------------"
echo
echo "---------------Memory Allocations for Guest & Primary Domain-----------------"
ldm list-domain -o memory |egrep -v "NAME|MEMORY" |sed '/^$/d'
echo "------------------------------------------------------------------------------"
echo
echo "Credits:"
echo "========"
echo "Lingeswaran R"
echo "www.UnixArena.com"
echo "------------------------------------------------------------------------------"
else
echo "This server is not based on sun4v Architecture"
echo "-------------------------------------------------------------------------------"
echo "Credits:"
echo "********"
echo "Lingeswaran R"
echo "www.UnixArena.com"
echo "------------------------------------------------------------------------------"
fi
Hope this script will be useful for you.
Share it ! Comment it !! Be Sociable !!!