Oracle took a brave decision by making ZFS as default root filesystem in Solaris 11 onwards. So ZFS knowledge is must for all of the Solaris administrator who is going to work on Solaris 11.I have worked on many volume manages like SVM(Solaris volume manager),VXVM (veritas volume manager) and LVM (Logical volume manager) but ZFS is one-step ahead compare to other volume managers in concept level(ZFS storage pool). When it comes to online features, none of the volume manages can beat veritas volume manager. This Tutorial/Training will cover various ZFS topics like zpool creation ,various ZPOOL layout,snapshots,datasets,cache devices,log devices and new features of ZFS in Solaris 11.
Prerequisites:
1.Skills:Knowledge of UNIX system administration
2.Lab Environment: Virtual Machine Solaris 11 or Solaris 10 u6 or higher version.
Topics:
1. Creating ZFS Storage pool and various zpool layouts(Current page)
7. How to replace the failed Disk n ZFS ZPOOL
Creating ZFS Storage pool and various zpool layouts
In this topic,we will see how to create a new zpool and how to convert zpool layouts. And also we will see various zpool layout advantages and disadvantages. Lets start with default zpool layout (striped.)
By default, ZFS will use the writing mechanism called data striping.For an example,if you have two harddisks on one zpool,data will be writing on the both the disks with default stripe size.
Creating a Striped zpool:
1.List the physical disks on the system by using format command.
root@Unixarena-SOL11:~# echo |format |grep d0
0. c8t0d0 vmware s-1.0-16.00gb="" virtual="" ware=""
1. c8t1d0 vmware s-1.0-2.00gb="" virtual="" ware=""
2. c8t2d0 vmware s-1.0-2.00gb="" virtual="" ware=""
3. c8t3d0 vmware s-1.0-2.00gb="" virtual="" ware=""
4. c8t4d0 vmware s-1.0-2.00gb="" virtual="" ware=""
5. c8t5d0 vmware s-1.0-2.00gb="" virtual="" ware=""
root@Unixarena-SOL11:~#
2.Create new ZFS striped storage pool using zpool command.
root@Unixarena-SOL11:~# zpool create oracle-S c8t1d0 c8t2d0
'oracle-S' successfully created, but with no redundancy; failure of one
device will cause loss of the pool
root@Unixarena-SOL11:~# zpool status oracle-S
pool: oracle-S
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracle-S ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~#
3.Verify the zpool oracle-S
root@Unixarena-SOL11:~# zpool list oracle-S NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT oracle-S 3.97G 88K 3.97G 0% 1.00x ONLINE - root@Unixarena-SOL11:~# zfs list oracle-S NAME USED AVAIL REFER MOUNTPOINT oracle-S 88K 3.91G 31K /oracle-S root@Unixarena-SOL11:~#
Advantages:
Data is striping between two physical disks.So writing speed will be much faster than concatenation.
Data is striping between two physical disks.So writing speed will be much faster than concatenation.
Disadvantages:
While creating the zpool itself,you will get warning is that,there will be no redundancy on this zpool. Failure of one physical disk will be result of loosing complete zpool.
While creating the zpool itself,you will get warning is that,there will be no redundancy on this zpool. Failure of one physical disk will be result of loosing complete zpool.
Creating a Mirrored zpool:
1.Create a mirrored ZFS storage pool using zpool command.
root@Unixarena-SOL11:~# zpool create oracle-M mirror c8t1d0 c8t2d0
root@Unixarena-SOL11:~# zpool status oracle-M
pool: oracle-M
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracle-M ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~#
2.Check the zpool details and mount point
root@Unixarena-SOL11:~# zpool list oracle-M NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT oracle-M 1.98G 85K 1.98G 0% 1.00x ONLINE - root@Unixarena-SOL11:~# zfs list oracle-M NAME USED AVAIL REFER MOUNTPOINT oracle-M 85K 1.95G 31K /oracle-M root@Unixarena-SOL11:~#
If you want to mirror multiple disks on the same zpool,use below command.
root@Unixarena-SOL11:~# zpool create oracle-2M mirror c8t1d0 c8t2d0 mirror c8t3d0 c8t4d0
root@Unixarena-SOL11:~# zpool status oracle-2M
pool: oracle-2M
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracle-2M ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
c8t3d0 ONLINE 0 0 0
c8t4d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~# zpool list oracle-2M
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
oracle-2M 3.97G 124K 3.97G 0% 1.00x ONLINE -
root@Unixarena-SOL11:~# zfs list oracle-2M
NAME USED AVAIL REFER MOUNTPOINT
oracle-2M 89.5K 3.91G 31K /oracle-2M
root@Unixarena-SOL11:~#
If you want create zpool with two way mirroring ,use below command.
root@Unixarena-SOL11:~# zpool create oracle-2-M mirror c8t1d0 c8t2d0 c8t3d0
root@Unixarena-SOL11:~# zpool status oracle-2-M
pool: oracle-2-M
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracle-2-M ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
c8t3d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~#
Advantages:
1.It provides the data redundancy
2.Faster read speed.
Disadvantages:
1.Slow write rate.
Creating a RAIDZ zpool:
Raid-Z is nothing but Raid 5 .It uses distributed parity and minimum 3 hard-drives need to be used.Raid-Z can tolerate one harddisk failure.
root@Unixarena-SOL11:~# zpool status oracle-Z
pool: oracle-Z
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracle-Z ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
c8t3d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~# zpool list oracle-Z
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
oracle-Z 5.94G 174K 5.94G 0% 1.00x ONLINE -
root@Unixarena-SOL11:~# zfs list oracle-Z
NAME USED AVAIL REFER MOUNTPOINT
oracle-Z 116K 3.89G 34.6K /oracle-Z
Creating a RAIDZ2 zpool:
RaidZ2 or Raid 6 will also use parity mechanism like raidz but it will keep two copies of parities .So that raidZ2 can tolerate two disks failures. This raidZ2 will be useful in larger zpools as is safer.
root@Unixarena-SOL11:~# zpool create oracle-2Z raidz2 c8t1d0 c8t2d0 c8t3d0 c8t4d0
root@Unixarena-SOL11:~# zpool status oracle-2Z
pool: oracle-2Z
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracle-2Z ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
c8t3d0 ONLINE 0 0 0
c8t4d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~# zpool list oracle-2Z
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
oracle-2Z 7.94G 252K 7.94G 0% 1.00x ONLINE -
root@Unixarena-SOL11:~# zfs list oracle-2Z
NAME USED AVAIL REFER MOUNTPOINT
oracle-2Z 126K 3.89G 37.4K /oracle-2Z
root@Unixarena-SOL11:~#
Creating a RAIDZ3 zpool:
RaidZ3 or Raid 7 will also use parity mechanism like raidz and raidz2 but it will keep three copies of parities .So that raidZ3 can tolerate three disks failures. This raidZ3 will be useful in larger zpools as is safest .
root@Unixarena-SOL11:~# zpool create oracle-3Z raidz3 c8t1d0 c8t2d0 c8t3d0 c8t4d0 c8t5d0
root@Unixarena-SOL11:~# zpool status oracle-3Z
pool: oracle-3Z
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracle-3Z ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
c8t3d0 ONLINE 0 0 0
c8t4d0 ONLINE 0 0 0
c8t5d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~# zpool list oracle-3Z
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
oracle-3Z 9.94G 564K 9.94G 0% 1.00x ONLINE -
root@Unixarena-SOL11:~# zfs list oracle-3Z
NAME USED AVAIL REFER MOUNTPOINT
oracle-3Z 132K 3.90G 39.8K /oracle-3Z
root@Unixarena-SOL11:~#
Destroying Zpool:
You can easily destroy the zpool using destroy option with zpool command.
Caution:Zpool destroy command will destroy the zpool if the dataset or pool in mounted status.
Here i am destroying existing zpool called oracle-3Z.
root@Unixarena-SOL11:~# zpool status oracle-3Z
pool: oracle-3Z
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracle-3Z ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
c8t3d0 ONLINE 0 0 0
c8t4d0 ONLINE 0 0 0
c8t5d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~# zpool destroy oracle-3Z
root@Unixarena-SOL11:~# zpool list oracle-3Z
cannot open 'oracle-3Z': no such pool
root@Unixarena-SOL11:~#
Exporting the Zpool:
You can export the zpool from one system to another Solaris machine if both the machines are having access to the same LUNs which are used on that zpool. Here i am exporting the oracledata pool.
You can export the zpool from one system to another Solaris machine if both the machines are having access to the same LUNs which are used on that zpool. Here i am exporting the oracledata pool.
root@Unixarena-SOL11:~# zpool status oracledata
pool: oracledata
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracledata ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~# zpool export oracledata
root@Unixarena-SOL11:~# zpool list oracledata
cannot open 'oracledata': no such pool
root@Unixarena-SOL11:~#
Importing the Zpool:
You can easily import the zpool using zpool import command.If you don;t know what are the zpools are available to import on that solaris host,use “zpool import” command without specifying the zpool name.This command will list the available zpool for import.
root@Unixarena-SOL11:~# zpool import
pool: oracledata
id: 2756639946282462629
state: ONLINE
action: The pool can be imported using its name or numeric identifier.
config:
oracledata ONLINE
c8t1d0 ONLINE
c8t2d0 ONLINE
root@Unixarena-SOL11:~#
To import the zpool “oracledata” .
root@Unixarena-SOL11:~# zpool import oracledata
root@Unixarena-SOL11:~# zpool list oracledata
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
oracledata 3.97G 138K 3.97G 0% 1.00x ONLINE -
root@Unixarena-SOL11:~# zpool status oracledata
pool: oracledata
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
oracledata ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~#
Zpool Integrity Check and clearing errors:
If you want to verify the zpool integrity and rectify the check sum errors, Run zpool scrub command to repair it.There is no fsck mechanism in ZFS unlike traditional filesystems.
root@Unixarena-SOL11:~# zpool scrub oracledata
root@Unixarena-SOL11:~# zpool status oracledata
pool: oracledata
state: ONLINE
scan: scrub repaired 0 in 0h0m with 0 errors on Wed Jul 24 02:22:46 2013
config:
NAME STATE READ WRITE CKSUM
oracledata ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~#
If you want to clear the error counts,use zpool clear command.
root@Unixarena-SOL11:~# zpool clear oracledata
root@Unixarena-SOL11:~# zpool status oracledata
pool: oracledata
state: ONLINE
scan: scrub repaired 0 in 0h0m with 0 errors on Wed Jul 24 02:22:46 2013
config:
NAME STATE READ WRITE CKSUM
oracledata ONLINE 0 0 0
c8t1d0 ONLINE 0 0 0
c8t2d0 ONLINE 0 0 0
errors: No known data errors
root@Unixarena-SOL11:~#
Recovering the Destroyed zpool
ZFS provides an option to recover the destroyed zpool if those zpool disks are not used for other purpose.Let see how can we recover zpool.
1.Destroy the zpool for testing purpose.
root@Unixarena-SOL11:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT oracle-RZ 11.9G 186K 11.9G 0% 1.00x ONLINE - rpool 15.6G 4.07G 11.6G 26% 1.00x ONLINE - root@Unixarena-SOL11:~# zpool destroy oracle-RZ
2.Check the destroyed zpool is available for import or not.
root@Unixarena-SOL11:~# zpool import -D
pool: oracle-RZ
id: 6355325059104864785
state: ONLINE (DESTROYED)
action: The pool can be imported using its name or numeric identifier.
config:
oracle-RZ ONLINE
raidz1-0 ONLINE
c8t1d0 ONLINE
c8t2d0 ONLINE
c8t3d0 ONLINE
raidz1-1 ONLINE
c8t4d0 ONLINE
c8t5d0 ONLINE
c8t6d0 ONLINE
root@Unixarena-SOL11:~#
3.Lets try to import it without specifying -D option.
root@Unixarena-SOL11:~# zpool import oracle-RZ cannot import 'oracle-RZ': no such pool available root@Unixarena-SOL11:~# zpool import 6355325059104864785 cannot import '6355325059104864785': no such pool available root@Unixarena-SOL11:~#
4.Now you try with -D option.It should work.You can use zpool name or zpool id to import the zpools.
root@Unixarena-SOL11:~# zpool import -D 6355325059104864785 root@Unixarena-SOL11:~# zpool list oracle-RZ NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT oracle-RZ 11.9G 230K 11.9G 0% 1.00x ONLINE - root@Unixarena-SOL11:~#
Hope this article will be helpful for ZFS beginners.Thank you for reading this.
Some of the topics are missing right now and those will be available soon.